How Are Selvedge Jeans Made? From Cutting to the Button Press
By CHILLMIND
There’s a red thread running down the pale edge of the denim in the foreground. Behind it, someone is guiding another piece of black cloth under the needle. The red line was already woven into the fabric when it reached the sewing table. Where it ends up on the jeans depends on how the pieces are cut.
Before the first stitch
A jeans pattern breaks the garment down into flat pieces. Each leg has a front and a back. The pockets and waistband have pieces of their own. There’s a little extra fabric along the edges where the pieces will join. That’s the seam allowance, and most of it ends up inside the jeans.
To use the selvedge at the outseam, the cutter can lay the outer edge of the leg pattern along the finished edge of the cloth. The rest of the panel is cut to shape. Once the front and back pieces are sewn together, the strip sits inside the seam that runs down the outside of the leg. That’s where you’ll find it when you turn up a cuff. See the woven edge up close
At the sewing machine
In our workshop clip, the operator keeps both hands close to the needle and guides the denim as it feeds through. It’s a good view of a seam in progress. The cloth is still flat on the table, but the pieces are starting to hold together. Watch the denim being sewn
Pick up a pair you already own and pinch the spot where the leg’s side seam meets the waistband. You can feel the layers pile up there. At the bottom of the leg, the fabric folds back on itself and a line of stitching holds it in place. The hem looks like a thin line from the outside. On the inside, you can see the fold that gives it thickness.
The leather patch and the button press
The close-up catches the needle beside the edge of our burgundy cowhide patch. On the finished pair, you can trace the stitches that hold the leather against the denim.
In a second clip, a press sets a metal button into dark denim. The button closes the waistband. The rivets near the pockets reinforce the spots you pull on when you put your hands in. On our black Bootcut, the zipper and rivets are from YKK. Watch the button press
How the finished Bootcut falls
This is our Black Raw Selvedge Bootcut in 15 oz, 100% cotton denim. The model is 185 cm / 6′1″ and wears L. The front view shows the leg opening out below the knee. In the side view, you can see where the fabric sits over the back of the shoe. See the front and side photos
If that’s the shape you’re after, start with a pair you already like wearing. Lay one leg flat and measure straight across the hem. Our black Bootcut measures 30 cm / 11.8 in across one leg opening in size L. A quick check with the tape will tell you whether that opening is wider or narrower than the one you’re used to.